| Leather
seats |
|
Leather seats,
complete kit with the 3 seats, the
parts inside the door panell and
the parts inside the dashboard.
High quality. |
|
All colors are
available. In black leather always
available direct from stock.
(Delivery in
exchange for the old seats) |
 |
| |
| |
| - |
Order-Nr.
24081 |
|
|
|
| Spax-Sport-Kit |
|
| This
complete kit is a devolpment from
„Fleischmann-Tuning“ only made for
the Matra Murena. The front torsion
springs will change for a coil spring
with an adjustable shock absorber.
The hight is adjustable stepless and
the hardness in 14 steps. A complete
kit contains the following parts: |
| |
|
|
| - |
4
Spax shock-absorbers (adjustable) |
|
| - |
4
Eibach Springs |
| - |
spring
plates |
| - |
TÜV-certificate
and fitting instruction |
| |
|
| |
|
| |
|
|
|
|
| Koni-Sport-Kit |
|
| This
Koni-Sport-Kit is the tight alternative
to the original shock absorbers. The
hardness is adjustable. The hight
keeps as the original. |
| |
|
| - |
Koni-Sportkit
(4 shock absorbers)
Order-Nr. 24034 |
|
| |
|
| - |
shock
absorber front
Order-Nr. 24035 |
| |
|
| - |
shock
absorber rear
Order-Nr. 24036 |
| |
|
|
|
|
| Sport-Silencer |
|
Both
Murena 1.6 and Murena 2.2 / „S“ we
deliver Sport-silencer with collecting-pipes.
All fitting parts are incl. the end-pipes
(conical/76 mm) are made from stainless-steel.
The following kits are available: |
| |
|
| - |
Murena
1.6:
Sport-silencer with 2-ends, collecting-pipe,
fitting-parts.
Order-Nr. 24010 |
|
| |
|
| - |
Murena
2.2 / "S":
Sport-silencer with 2-ends, collecting-pipe,
fitting-parts.
Order-Nr. 24009/I |
 |
| |
|
| - |
Collecting-pipe
for mounting with the original exhauster
to replace the cast exhaust manifold
and the original exhaust pipe.
Order-Nr. 24006 |
 |
| |
|
|
|
|
| Gotti
or Fleischmann Wheels
|
|
For the Matra Murena we deliver
an enormous choice of 2- and 3-part
ligth alloy wheels. This exclusive
wheels are made only for the Matra
Murena and so they fit perfect.
There are no limits in the wide.
You can change only an outside or
inside ring if they are damaged.
We stock a large choice of wheels
and all spare parts (Rings, gaskests
...) for them.
Here are some examples: |
| |
|
| - |
Order-Nr.
24001,
Gotti-wheels (2-part),
|
|
7 x 15“,
for the original body |
 |
| |
|
| - |
Order-Nr. 24108,
Fleischmann-wheels |
 |
(3-part),
front 7 x 15“ / rear 8 x 15“ for F2
or F3 body-kit
|
|
| |
|
|
|
|
|
| Sport-Air-Cleaner
for Murena 2.2/"S"
|
| |
This
particular K&N air filter cares for
a better performance of your Matra.
The K&N air filters are washable for
a long life. Easy to change with the
original air filter. |
| |
|
| |
|
| |
|
| - |
Order
Nr. 24129 |
|
|
|
| Distance
Rings
|
| |
This
popular tuning-part has not to miss
for the Matra Murena. We deliver distance-rings
in different thickness, for example
15mm per wheel (= 30mm wheel track) |
| |
|
| |
|
| |
|
| - |
Order
Nr. 24106 |
| |
(1
distance ring + 4 longer bolts) |
|
|
|
| Rear
Bonnet |
|
| The
rear bonnet is one of the most popular
tuning-parts for the Matra Murena: |
| |
|
| - |
Easy mounting at the same fixing
points like the original rear glass |
| - |
Fits
perfect |
| - |
You can varnishthe bonnet in the
color of your car |
| |
|
| |
|
| - |
Order-Nr.
24002,
Bonnet (closed) |
|
| |
|
| - |
Order-Nr.
24003,
Bonnet (open, for engine ventilation) |
 |
| |
|
|
|
|
| Grills
for the side windows
|
| Easy
to fit with screws/adhesives. On the
left side a hinge for the gas cap
is trained. |
|
| |
|
| - |
Set
of 2 Grills |
| |
Order-Nr.
24004, |
| |
|
|
|
|
| Air
scoops for the side windows
|
| Easy
to fit with screws/adhesives. On the
left side a hinge for the gas cap
is trained. |
|
| |
|
| - |
Set
of 2 air scoops |
| |
Order-Nr.
24112,
|
| |
|
|
|
|
| Rear
Spoiler F1
|
| The
rear spoiler has the same optique
like the original Murena 2.2 „S“ rear
spoiler. Easy to fit with screws or
adhesives. |
|
|
|
| - |
Tail
spoiler |
| |
Order-Nr. 24014 |
| |
|
|
|
|
| Rear
wing
|
| You
can fit the rear wing on the special
rear bonnet (24002/03). |
|
| |
|
| - |
Order-Nr.
24005,
rear wing (incl. fixing parts) |
| |
|
| |
|
|
|
|
| Rear
spoiler |
This
rare spoiler is easy to fit on the
screen above the tailligths.
This part is only used available. |
 |
| |
|
|
| - |
Order-Nr.
24113,
rear spoiler |
 |
| |
|
|
|
|
|
| Tail
wing
|
This beautifull spoiler is installed
on the rear fenders.
|
 |
| |
|
|
| - |
Order-Nr.
24050,
Tail wing |
 |
| |
|
|
|
|
|
| Tail
wing
|
This enormous tail wing fits perfect
to widened Murenas.
This part is only used available. |
| |
|
|
| - |
Order-Nr.
24114,
Tail wing |
|
| |
|
|
| |
|
| |
|
| |
|
|
|
|
| "Lamm-Tuning"
Kit
|
|
This kit consists of the following
parts: front-spoiler, side-panels,
rear-panel. All parts are made from
GRP and can be installed also individually. |
| |
|
|
| - |
Order-Nr.
24045,
front-spoiler |
 |
| |
|
|
| - |
Order-Nr.
24047,
kit of side-panels |
 |
| |
|
|
| - |
Order-Nr.
24048,
rear-panel |
 |
| |
|
|
|
|
| Fleischmann
F1 Kit |
|
This kit consists of the following
parts: front-spoiler, side-panels
and panels for the rear bumper. All
parts are made from GRP and can be
installed also individually. |
| |
|
|
| - |
Order-Nr.
24012,
front-spoiler |
 |
| |
|
|
| - |
Order-Nr.
24013,
kit of side-panels |
 |
| |
|
|
| - |
Tail
apron
Order-Nr. 24048
Order-Nr. 24015,
panels (2) for the rear bumper |
 |
| |
|
|
|
|
| Fleischmann
F2 Kit
|
A complete kit consists of the follwing
parts:
front-spoiler, 2 side panels, 4 panels
for the front/rear fenders and 2 panels
for the rear bumper.
Wheels possible up to 9 x 15“ (Fleischmann
or Gotti). All parts are made from
GRP |
| |
|
|
| - |
Order-Nr.
24017,
complete kit „F2“ |
|
| |
|
|
| |
 |
| |
|
| |
|
| |
|
|
|
|
| Fleischmann
F3 Kit |
A complete kit consists of the following
parts:
complete new front bumper/spoiler,
new front fenders, new rear fenders,
2 panels for the doors, 2 side-panels
and 2 panels for the rear bumper.
Wheels possible up to 10 x 15“ (Fleischmann
or Gotti).
All parts (spoiler, fender ...) are
also individually available as spare
parts. |
| |
|
|
| - |
Order-Nr.
24020,
F3-kit |
|
| |
|
|
| |
|
| |
 |
| |
|
| |
|
|
|
|
| Fleischmann
F4 Kit |
With the F4 kit (as the F3 kit) almost
all body sections are exchanged against
new sections:
front bumper/spoiler unit, front-fenders,
rear-fenders, side panels and door
essays.
Wheels possible up to 13 x 15“ (Fleischmann
or Gotti). Width of the Murena in
the back 200 cm ! |
| |
|
|
| - |
Order-Nr.
24024,
F4 kit |
|
| |
|
|
| |
|
|
|
|
| Engine
Tuning
|
|
We supply various articles for engine
tuning: |
 |
|
|
| - |
Carburetor
systems (Weber + Solex) |
|
| - |
Inlet
manifolds |
|
| - |
Camshafts |
|
| - |
Facilitated
flywheels |
|
| - |
Strengthened
radiators |
|
| |
|
|
| |
For
more informations please order the
Matra Murena
catalog. |
| |
